NORA #1629 - 10 Inch Chef - Hustle
- Blade Type: Chef
- Blade Length: 10 Inches
- Total Length: 15 Inches
- Handle Style: Western | Right or Left Hand Use
- Steel: AEB-L Stainless Steel
- Handle Materials: Stabilized Padauk Wood, White G10, Acrylic Based Resin with hues of teal, orange & white, brass pins
- Rockwell Hardness: 62 HRC
- Grind Type: Full Flat Hybrid - Performance Grind (3 different bevels blended)
- This Blade is Ground...
- Thin for Performance (best performance but delicate)
- Thick for Durability (tough, built to last for heavy wear-n-tear)
- >>> Mid-Range with Special Geometry (specially ground for food release and glide but blade is kept slightly thicker for durability)
- This Knife Feels...
- Heavy in Hand (Hefty. Durable.)
- Light (nimble, maneuverable)
- >>> Not too heavy, not too light (Switzerland. Fitting weight for the size of the knife.)
GENERAL USES OF THIS KNIFE:
Our take on the classic Chef knife. This is an extremely versatile knife that is a jack-of-all-trades worker and one of the single most important knives in a kitchen. Our Chef knife design can easily accommodate both a pinch grip and a full hold. It is a good choice for those with larger hands or those who prefer a full hold on the handle. Our design is also excellent for those who like a rocking motion while cutting.
My dad wore Converse growing up in the 50's. My husband and I also wore Converse growing up. Kids (and adults!) wear it now and it seems likely to me that my young ones will probably do the same thing.
We don't really know why we felt the need to place these timeless kicks on a knife but why the hell not. I mean we didn't really need the 'Kung Fu Fighting' song either but somehow I love that too.
So there it is...the deep meaning behind the engraving on this knife. May it always remind you of a time when the hustle was real and the living was good.
General Notes: This knife has been custom engraved. The engraving was done via fiber laser so there is depth to the engraving more so than you generally see with an electro etch or CO2 laser. We do, however, keep the depth low so it does not catch food and minimally interferes with the primary cutting function of the knife. A small amount of stickage is normal around the engraved area, especially initially. (due to a very small burr that is formed around the engraved area) This will lessen over time as the blade is used. The engraving should last as long as the knife but please note that it will slightly degrade over time as abrasives are used on the knife. We recommend the soft end of a sponge with soap and water for cleaning and mineral oil periodically to condition the blade (and handle). Keep in mind that stronger abrasives, such as steel wool, scotch brite pads, sand paper or stone sharpening directly on the engraved image will further degrade the image.
HANDLE DESIGN & MATERIALS:
Every one of our knives is handmade, unique and numbered. This NORA is handled with a piece of stabilized Padauk wood paired with a punchy piece of acrylic resin that has a sort of lava-lamp look to it and is colored with hues of teal, orange, and white. We added black G10 liners for added durability and brass pins finish the knife off.
Please note that freshly cut and sanded Padauk starts off a very rich, orangey color and gradually fades to a darker, reddish hue over time. We think it just gets better with age but we wanted you to be aware of the color change over time.
Wood stabilization is an added feature that we offer with our knives. Wood that is stabilized has been injected with a clear acrylic resin under a vacuum process. Stabilization helps to minimize, if not eliminate, any cracking, warping, shrinkage and/or expanding of the material. Stabilized wood will not absorb water and is generally impervious to oils. The process helps to ensure your knife has a long lifespan in the kitchen.
AEB-L STAINLESS STEEL
This knife blade is composed of AEB-L stainless steel which is a high-quality Swedish metal, originally developed for razor blades. Recently, steel suppliers have made this steel available in thicker sheets and it has proven to be an excellent adaptation for the cutlery industry.
AEB-L has a beautiful balance of carbon and chromium and, with proper heat treatment, this steel produces both a very fine edge as well as excellent toughness and edge stability. The fine grain structure also makes this steel very easy to sharpen. We believe it is one of the finest stainless steels available on the market today for use with kitchen knives.
As a side note, there are two things we like to mention about this steel:
1.) This steel responds beautifully to honing and if the knife is honed regularly it should need infrequent sharpening.
2.) AEB-L is a stainless steel but just barely. The higher carbon content in this stainless is what allows it to get a fine edge and higher hardness than other stainless steels but it also has a tendency to sometimes form very fine rust spots on the blade. If this happens, these are easily removed with a green scotch brite pad and usually the rough end of a kitchen sponge will also do the trick.