NORA #1250 - CPM-M4 Chef - Ironwood & Blue G10
$ 399.00
KNIFE HIGHLIGHTS
- Blade Type: Chef
- Blade Length: 8.5 Inches
- Total Length: 13 Inches
- Handle Style: Western | Right or Left Hand Use
- Steel: CPM-M4 Carbon Steel
- Handle Materials: Arizona Ironwood, Blue|Tan|White G10, Stainless Steel Pins
- **Please note there are very, very small surface hairline cracks in some parts of the Ironwood. Please reference the pics for a better visual. These are absolutely cosmetic, will not at all affect the life of the knife and are very hard to even see but we wanted to be as transparent and up-front as possible about our product. We have discounted the knife slightly to reflect this small cosmetic flaw.
- Rockwell Hardness: 66 HRC
- Grind Type: Full Flat Hybrid
- This Blade is Ground...
- Thin for Performance (best performance but delicate)
- Thick for Durability (tough, built to last for heavy wear-n-tear)
- >>>Mid-Range with Special Geometry (good performance but blade is kept slightly thicker for durability)
- This Knife Feels...
- Heavy in Hand (hefty, durable)
- Light (nimble, maneuverable)
- >>>Not too heavy, not too light (Switzerland)
GENERAL USES OF THIS KNIFE
CHEF KNIFE
Our take on the classic Chef knife. This is an extremely versatile knife that is a jack-of-all-trades worker and one of the single most important knives in a kitchen. Our Chef knife design can easily accommodate both a pinch grip and a full hold. It is a good choice for those with larger hands or those who prefer a full hold on the handle. Our design is also excellent for those who like a rocking motion while cutting.
STEEL INFORMATION:
CPM- M4 CARBON STEEL
The blade on this knife is composed of a high carbon CPM M4 steel. M4 is the best carbon steel we have ever used in regards to blade performance. After doing a wide amount of research on this steel, we decided to give it a go and have been extremely impressed with its performance thus far.
CPM M4 steel is unique in that it gets extremely hard. Hardness in steel generally equates to a finer edge and great edge retention. We took this blade to a solid 66 HRC which is incredibly hard compared to most production knives which fall in the mid to high 50's.
The high hardness allows it to maintain amazing edge retention but unlike other steels at this hardness its not as brittle or delicate. It is actually highly wear resistant which means you don't need to worry as much about the knife chipping or breaking. As an added bonus, M4 is surprisingly corrosion resistant when compared to other carbon steels.
Its a rugged knife for the performance it offers and this combination is rare when you harden steel to beyond 62 HRC. Please note though that the steel isn't bullet-proof...if you drop the knife on a very hard surface or slam it down on a hard object, it is likely to chip.
The pros of this steel outweigh the cons in our opinion but it must be mentioned that this steel is harder to sharpen than many others so you will need to factor that into your decision as it does represent a bit more maintenance than other knives. On the flip side, you don't need to sharpen this knife nearly as frequently as others.
**As this is a carbon steel, the blade will form a slight patina over time. This is normal and is actually the mark of a beautifully used knife. Please note, however, that a carbon knife does require more maintenance than its stainless steel counterpart, mainly that it must be washed or wiped clean shortly after each use to prevent unwanted rust or stains. We have acid etched this knife to protect the steel and start the patina process. Over time this etch will fade slightly and will be replaced by the individual patina you make while using the knife.
HANDLE DESIGN & MATERIALS:
Every one of our knives is handmade, unique and numbered. NORA#1250 is a mix of hardy Arizona Ironwood and its equally durable composite counterpart: G10. The main materials are Ironwood and Blue G10 but we also added a small accent stripe of white G10 that is flanked by 2 small stripes of tan G10. Liners are coordinating and are also G10. Its not an incredibly showy knife but we love the simple, small details on this one. These two materials combine to make a clean, timeless knife that should serve as an excellent workhorse for you in the kitchen.
Many people ask us what exactly is G10? It is an incredibly strong & durable fiberglass laminate that was originally used in the electronics industry. It has been adapted in the knife making world and has proven to be an excellent material for handles as it has high strength, low moisture absorption and can be found in a variety of colors. Its one of our favorite materials to work with outside of wood.