NORA #1627 - 10 Inch Chef - Bird & Twig
NORA #1627 - 10 Inch Chef - Bird & Twig
NORA #1627 - 10 Inch Chef - Bird & Twig
NORA #1627 - 10 Inch Chef - Bird & Twig
NORA #1627 - 10 Inch Chef - Bird & Twig
NORA #1627 - 10 Inch Chef - Bird & Twig
NORA #1627 - 10 Inch Chef - Bird & Twig
NORA #1627 - 10 Inch Chef - Bird & Twig
NORA #1627 - 10 Inch Chef - Bird & Twig
NORA #1627 - 10 Inch Chef - Bird & Twig
NORA #1627 - 10 Inch Chef - Bird & Twig
NORA #1627 - 10 Inch Chef - Bird & Twig
NORA #1627 - 10 Inch Chef - Bird & Twig

NORA #1627 - 10 Inch Chef - Bird & Twig

$ 418.35

KNIFE HIGHLIGHTS

  • Blade Type: Chef
  • Blade Length: 10 Inches
  • Total Length: 15 Inches
  • Handle Style: Western | Right or Left Hand Use
  • Steel: AEB-L Stainless Steel
  • Handle Materials: Stabilized African Bubinga Wood, Brass Pins, dual G10 liners in forest green and tan
  • Rockwell Hardness: 62 HRC
  • Grind Type: Full Flat Hybrid - Performance Grind (3 different bevels blended)
  • This Blade is Ground...
    • Thin for Performance (best performance but delicate)
    • Thick for Durability (tough, built to last for heavy wear-n-tear)
    • >>> Mid-Range with Special Geometry (specially ground for food release and glide but blade is kept slightly thicker for durability)
  • This Knife Feels...
    • Heavy in Hand (Hefty. Durable.)
    • Light (nimble, maneuverable)
    • >>> Not too heavy, not too light (Switzerland.  Fitting weight for the size of the knife.)

    GENERAL USES OF THIS KNIFE:

    CHEF KNIFE

    Our take on the classic Chef knife. This is an extremely versatile knife that is a jack-of-all-trades worker and one of the single most important knives in a kitchen. Our Chef knife design can easily accommodate both a pinch grip and a full hold.  It is a good choice for those with larger hands or those who prefer a full hold on the handle.  Our design is also excellent for those who like a rocking motion while cutting.

    ENGRAVING:

    This knife was inspired by the simple truth that nature is pretty.  Birds, flowers, and trees are particularly pleasing to the eye.  That was about all we needed to justify this engraving and the truth is, it is pretty.  This may be our favorite in this small batch. 

    The engraving depicts a warbler perched among a twig that somehow has beautiful chamomile flowers growing from it.  Don't ask us for reality here, we just put three things together that we like and the result is this pretty little fellow forever immortalized on a knife that will sit happily in your kitchen for a long while. Portlandia shed light on a simple truth: put a bird on it and everything is better.

    General Notes: This knife has been custom engraved.  The engraving was done via fiber laser so there is depth to the engraving more so than you generally see with an electro etch or CO2 laser. We do, however, keep the depth low so it does not catch food and minimally interferes with the primary cutting function of the knife. A small amount of stickage is normal around the engraved area, especially initially. (due to a very small burr that is formed around the engraved area) This will lessen over time as the blade is used.  The engraving should last as long as the knife but please note that it will slightly degrade over time as abrasives are used on the knife. We recommend the soft end of a sponge with soap and water for cleaning and mineral oil periodically to condition the blade (and handle). Keep in mind that stronger abrasives, such as steel wool, scotch brite pads, sand paper or stone sharpening directly on the engraved image will further degrade the image.  

    HANDLE DESIGN & MATERIALS:

    Every one of our knives is handmade, unique and numbered.  We kept this handle simple and classic by using a beautiful piece of stabilized African Bubinga wood and added dual G10 liners in forest green and tan.  They help give this knife just a small pop of contrast and they provide added durability as well.

    Wood stabilization is an added feature that we offer with our knives. Wood that is stabilized has been injected with a clear acrylic resin under a vacuum process. Stabilization helps to minimize, if not eliminate, any cracking, warping, shrinkage and/or expanding of the material. Stabilized wood will not absorb water and is generally impervious to oils. The process helps to ensure your knife has a long lifespan in the kitchen. 

    STEEL INFORMATION:

    AEB-L STAINLESS STEEL

    This knife blade is composed of AEB-L stainless steel which is a high-quality Swedish metal, originally developed for razor blades.  Recently, steel suppliers have made this steel available in thicker sheets and it has proven to be an excellent adaptation for the cutlery industry.

    AEB-L has a beautiful balance of carbon and chromium and, with proper heat treatment, this steel produces both a very fine edge as well as excellent toughness and edge stability.  The fine grain structure also makes this steel very easy to sharpen. We believe it is one of the finest stainless steels available on the market today for use with kitchen knives.

    As a side note, there are two things we like to mention about this steel:

    1.) This steel responds beautifully to honing and if the knife is honed regularly it should need infrequent sharpening.

    2.) AEB-L is a stainless steel but just barely.  The higher carbon content in this stainless is what allows it to get a fine edge and higher hardness than other stainless steels but it also has a tendency to sometimes form very fine rust spots on the blade.  If this happens, these are easily removed with a green scotch brite pad and usually the rough end of a kitchen sponge will also do the trick.