NORA "Pearl" - 8.5' AEB-L Chef - LIMITED RUN OF 10
NORA "Pearl" - 8.5' AEB-L Chef - LIMITED RUN OF 10
NORA "Pearl" - 8.5' AEB-L Chef - LIMITED RUN OF 10
NORA "Pearl" - 8.5' AEB-L Chef - LIMITED RUN OF 10
NORA "Pearl" - 8.5' AEB-L Chef - LIMITED RUN OF 10
NORA "Pearl" - 8.5' AEB-L Chef - LIMITED RUN OF 10
NORA "Pearl" - 8.5' AEB-L Chef - LIMITED RUN OF 10
NORA "Pearl" - 8.5' AEB-L Chef - LIMITED RUN OF 10
NORA "Pearl" - 8.5' AEB-L Chef - LIMITED RUN OF 10
NORA "Pearl" - 8.5' AEB-L Chef - LIMITED RUN OF 10
NORA "Pearl" - 8.5' AEB-L Chef - LIMITED RUN OF 10
NORA "Pearl" - 8.5' AEB-L Chef - LIMITED RUN OF 10

NORA "Pearl" - 8.5' AEB-L Chef - LIMITED RUN OF 10

$ 391.25

WE ARE OFFERING THIS KNIFE IN A SMALL, LIMITED RUN EDITION OF 10.  THESE ARE MADE TO ORDER AND WILL BE COMPLETED WITHIN ROUGHLY 3 MONTHS OF YOUR PURCHASE.  WE REQUIRE FULL PAYMENT UP FRONT.  PLEASE DO NOT PURCHASE THIS KNIFE IF YOU NEED OR WANT IT RIGHT AWAY.  WE HAVE MADE #1 OF 10 AND IF YOU ARE THE FIRST TO ORDER THIS KNIFE THEN YOU WILL RECEIVE #1468, WHICH IS PICTURED BELOW, IMMEDIATELY.  ALL OTHER ORDERS WILL BE SHIPPED UPON COMPLETION, TO BE DELIVERED NO LATER THAN: JULY 1, 2019.

KNIFE HIGHLIGHTS

  • Blade Type: Chef
  • Blade Length: 8.5 Inches
  • Total Length: 13 Inches
  • Handle Style: Western | Right or Left Hand Use
  • Steel: AEB-L Stainless Steel
  • Handle Materials: Stabilized American Walnut Wood, Brass Pins, White G10 Liners
  • Rockwell Hardness: 62 HRC
  • Grind Type: Full Flat Hybrid - Performance Grind (3 different bevels blended)
  • This Blade is Ground...
    • Thin for Performance (best performance but delicate)
    • Thick for Durability (tough, built to last for heavy wear-n-tear)
    • >>> Mid-Range with Special Geometry (specially ground for food release and glide but blade is kept slightly thicker for durability)
  • This Knife Feels...
    • Heavy in Hand (Hefty. Durable.)
    • Light (nimble, maneuverable)
    • >>> Not too heavy, not too light (Switzerland.  Fitting weight for the size of the knife.)

    GENERAL USES OF THIS KNIFE:

    CHEF KNIFE

    Our take on the classic Chef knife. This is an extremely versatile knife that is a jack-of-all-trades worker and one of the single most important knives in a kitchen. Our Chef knife design can easily accommodate both a pinch grip and a full hold.  It is a good choice for those with larger hands or those who prefer a full hold on the handle.  Our design is also excellent for those who like a rocking motion while cutting.

    ENGRAVING:

    The knife has been custom engraved and affectionately named: "Pearl."  We spent a lot of time getting the engraving just right on this one in terms of placement and orientation.  We absolutely love how it turned out and we love the simple beauty of this faceless woman, adorned with pearls on both her neckline and ears.  

     **This knife has been custom engraved. The engraving was done via a dual diode laser so there is depth to the engraving more so than you usually see with an electro etch or CO2 laser. We do, however, keep the depth minimal so it does not catch food and minimally interferes with the primary cutting function of the knife. A small amount of stickage is normal around the engraved area, especially initially. This will lessen over time as the blade is used. Please note though, if performance is your #1 priority then we encourage you to NOT purchase this blade. A blade with no engraving WILL have a smoother glide than a blade with engraving. For most, however, this difference is so minimal that it is barely noticed. We just like to provide a full disclosure up front so you know exactly what you are purchasing.

    The engraving should last as long as the knife but please note that it will slightly degrade over time as abrasives are used on the knife. We recommend the soft end of a sponge with soap and water for cleaning and mineral oil periodically to condition the blade (and handle). Keep in mind that stronger abrasives, such as steel wool, scotch brite pads, sand paper or stone sharpening directly on the engraved image will further degrade the image.  

    HANDLE DESIGN & MATERIALS:

    Every one of our knives is handmade, unique and numbered. This NORA knife has been kept simple and classic.  We took a beautiful piece of stabilized figured walnut and accented it with brass pins and a set of white G10 liners, which provide contrast as well as added durability.  

    Wood stabilization is an added feature that we offer with our knives. Wood that is stabilized has been injected with a clear acrylic resin under a vacuum process. Stabilization helps to minimize, if not eliminate, any cracking, warping, shrinkage and/or expanding of the material. Stabilized wood will not absorb water and is generally impervious to oils. The process helps to ensure your knife has a long lifespan in the kitchen. 

    STEEL INFORMATION:

    AEB-L STAINLESS STEEL

    This knife blade is composed of AEB-L stainless steel which is a high-quality Swedish metal, originally developed for razor blades.  Recently, steel suppliers have made this steel available in thicker sheets and it has proven to be an excellent adaptation for the cutlery industry.

    AEB-L has a beautiful balance of carbon and chromium and, with proper heat treatment, this steel produces both a very fine edge as well as excellent toughness and edge stability.  The fine grain structure also makes this steel very easy to sharpen. We believe it is one of the finest stainless steels available on the market today for use with kitchen knives.

    As a side note, there are two things we like to mention about this steel:

    1.) This steel responds beautifully to honing and if the knife is honed regularly it should need infrequent sharpening.

    2.) AEB-L is a stainless steel but just barely.  The concept of stainless steel is very misleading because every steel is, at some level, reactive to water and other elements. 

    The higher carbon content in this stainless is what allows it to get a fine edge and higher hardness compared to many other stainless steels but it also has a tendency to sometimes form very fine rust spots on the blade.  If this happens, these are easily removed with a green or red scotch brite pad and usually the rough end of a kitchen sponge will also do the trick. Take extra care to remove any excess wetness that remain on this blade.  Drip drying is NOT recommended.