NORA #1241 - CPM-M4 Chef - Black Palm | Padauk
$ 440.00
KNIFE HIGHLIGHTS
- Blade Type: Chef
- Blade Length: 8.5 Inches
- Total Length: 13 Inches
- Handle Style: Western | Right or Left Hand Use
- Steel: CPM-M4 Carbon Steel
- Handle Materials: Stabilized Black Palm & Padauk, Orange & Forest Green G10, Copper pins
- Rockwell Hardness: 66 HRC
- Grind Type: Full Flat
- This Blade is Ground...
- Thin for Performance (best performance but delicate)
- Thick for Durability (tough, built to last for heavy wear-n-tear)
- >>>Mid-Range (good performance but blade is kept slightly thicker for durability)
- This Knife Feels...
- Heavy in Hand (hefty, durable)
- Light (nimble, maneuverable)
- >>>Not too heavy, not too light (Switzerland)
GENERAL USES OF THIS KNIFE
CHEF KNIFE
Our take on the classic Chef knife. This is an extremely versatile knife that is a jack-of-all-trades worker and one of the single most important knives in a kitchen. Our Chef knife design can easily accommodate both a pinch grip and a full hold. It is a good choice for those with larger hands or those who prefer a full hold on the handle. Our design is also excellent for those who like a rocking motion while cutting.
STEEL INFORMATION:
CPM- M4 CARBON STEEL
The blade on this knife is composed of a high carbon CPM M4 steel. M4 is the best carbon steel we have ever used in regards to blade performance. After doing a wide amount of research on this steel, we decided to give it a go and have been extremely impressed with its performance thus far.
CPM M4 steel is unique in that it gets extremely hard. Hardness in steel generally equates to a finer edge and great edge retention. We took this blade to a solid 66 HRC which is incredibly hard compared to most production knives which fall in the mid to high 50's.
The high hardness allows it to maintain amazing edge retention but unlike other steels at this hardness its not as brittle or delicate. It is actually highly wear resistant which means you don't need to worry as much about the knife chipping or breaking. As an added bonus, M4 is surprisingly corrosion resistant when compared to other carbon steels.
Its a rugged knife for the performance it offers and this combination is rare when you harden steel to beyond 62 HRC. Please note though that the steel isn't bullet-proof...if you drop the knife on a very hard surface or slam it down on a hard object, it is likely to chip.
The pros of this steel outweigh the cons in our opinion but it must be mentioned that this steel is harder to sharpen than many others so you will need to factor that into your decision as it does represent a bit more maintenance than other knives. On the flip side, you don't need to sharpen this knife nearly as frequently as others.
**As this is a carbon steel, the blade will form a slight patina over time. This is normal and is actually the mark of a beautifully used knife. Please note, however, that a carbon knife does require more maintenance than its stainless steel counterpart, mainly that it must be washed or wiped clean shortly after each use to prevent unwanted rust or stains. We have acid etched this knife to protect the steel and start the patina process. Over time this etch will fade slightly and will be replaced by the individual patina you make while using the knife. Please note that the initial etch may also cause light stickage until the blade is properly broke in. This break-in period can be sped up by taking a Scotch Brite to the blade and smoothing the blade's surface but this will remove some of the darker etch and coloring of the blade.
HANDLE DESIGN & MATERIALS:
Every one of our knives is handmade, unique and numbered. NORA#1241 is a mix of African padauk & black palm wood. Both have been stabilized for durability. Note that the padauk starts as a bright, orangey-red when initially cut and then slowly darkens to a deep reddish brown over time. Separating these materials is a small stripe of mixed G10 in both forest green and hunter orange. Pins are copper and liner is a dual liner with both orange and forest green to complement the middle stripe. The combination of all these materials makes for a modern but classy look.
Wood stabilization is an added feature that we offer with our knives. Wood that is stabilized has been injected with a clear acrylic resin under a vacuum process. Stabilization helps to minimize any cracking, warping, shrinkage and/or expanding of the material. Stabilized wood will absorb very little water and is generally impervious to oils. The process helps to ensure your knife has a long lifespan in the kitchen.